WYBOT C2 Vision Cordless Pool Robot Vacuum (2025 NY), Debris Detection med AI-kamera, 8-i-1 Master Cleaning, To-Layers Filtrering, Børsteløse motorer til kraftig sugning, til pools op til 1940 Sq.ft, Sort Grøn

1. Er WYBOT C2 Vision helt trådløs? Hvordan oplades det?  

Ja, WYBOT C2 Vision er en 100 % trådløs poolrengøringsrobot. Den leveres med et aftageligt genopladeligt batteri, der kan oplades ved hjælp af den medfølgende dockingstation. Der er ikke brug for strømledninger under drift.  

2. Hvor længe holder batteriet, og hvad er rengøringsdækningen pr. opladning?

WYBOT C2 Vision tilbyder op til 90 minutters driftstid på fuld opladning, og dækker op til 1,500 sq.ft (140 m²) poolområde. Batterilevetiden kan variere afhængigt af poolstørrelse og snavsniveauer.  

3. Fungerer robotten på alle pooloverflader?

Ja, C2 Vision er designet til **alle pooloverflader, inklusive beton-, fliser-, glasfiber- og vinylforede pools. Dens intelligente navigation sikrer grundig rengøring uden at beskadige sarte overflader.

4. Hvordan fungerer Vision Navigation-systemet?

Robotten bruger avanceret AI vision-navigation med et indbygget kamera og sensorer til at kortlægge din pool, undgå forhindringer og rense effektivt. Det sikrer, at ingen pletter går glip af, i modsætning til random-path robotter.  

5. Hvilken vedligeholdelse er påkrævet til WYBOT C2 Vision?

Robotten har en stor filterkurv til nem fjernelse af snavs – du skal blot skylle den efter hver brug. Børsterne skal muligvis rengøres lejlighedsvis, og batteriet skal opbevares korrekt, når det ikke er i brug i længere perioder.

6. How often should I clean my pool?

This depends on how much debris has accumulated in your pool. A general guideline is to run it once or twice a week.

7. How do I clean the robotic pool cleaner?

To clean the robotic pool cleaner, you should remove and rinse the filter, brushes, and any other removable parts after each use. It is also recommended to deep clean the cleaner every few months.

8. Will my WYBOT work in a saltwater swimming pool?

Yes, our WYBOT robots can be used in saltwater pools.

Overtime the saltwater can cause premature wear and tear to the robot's wearable components, therefore we recommend rinsing the robot with sweet water (tap water) after each cycle.

For optimal use and maintenance, the salinity levels should not be above 4,000 P.P.M.

9. Why can't the cleaner be charged on a covered outdoor deck?

We do not recommend charging the device outdoors due to the risk of the battery catching fire caused by sun exposure. Although the deck may be covered, there are still restrictions on the temperature range for outdoor charging. We advise against general consumers charging the device outdoors.

In some areas, especially in hot and humid climates, outdoor charging may be more dangerous. Therefore, we recommend users to charge the device indoors and avoid exposing it to sunlight or high-temperature environments. If you have any questions or need more information, please feel free to contact our customer service team.

10. What’s the best procedure for operating the robot and the App?

Turn on the WYBOT → Enable the Bluetooth of your mobile phone →  Define your pool on the “my pool” page →  Click “+” to search the robot  →  Choose your WYBOT name and add it to the list  →  Click robot image to set cleaning parameters →  select your swimming pool for cleaning on the right side of the page  →  choose cleaning mode, path, and others →  Close the App and put the robot into the pool.